Double glazing spacer bar bending machine aluminum spacer Cutting and Bending Machine
Double glazing Spacer Bending Machine is a special equipment for making aluminum frames of insulating glass, which replaces the traditional fabrication technology. Spacer bending machine can make a variety of convex polygonal aluminum frames by one aluminum strip in one time, thus strengthening the strength of the aluminum frame, making the sealing effect of the insulating glass more better.
Common specification for aluminum spacer bars is 4mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 8mm, 8.5mm, 9mm, 10mm, 11mm, 11.5mm, 12mm, 14mm, 14.5mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 25mm, etc.
Main features of Double glazing spacer bending machine
• Automatically cut and feed aluminum spacers
• High working speed Siemens 1200 PLC control system
• 4 groups of storage (2 or 12 groups of storage is optional)
• Automatically avoid pins when bending or cutting
• Bend the spacer frame continuously
• Different bending tools for different spacer sizes
• Aluminum spacers are available in sizes 6A-27A
• Suspend and reset the device to handle equipment failures
• Bent aluminum spacer, smooth stainless steel, warm spacer
• USB input function, directly read Excel format files
• Automatically drills holes for filling with argon gas (optional)
• Spacer print code function (optional)
• Printing of label sticker function (optional)
• Connect to ERP system (optional)
• Bent shape frame. Use the circle wheel device to bend a circle frame or a frame with circle corners. Minimum R60, maximum R150, spacer size: 6A to 16A). Different sized aluminum bars require different sized tools (optional)
Technical data of Double Glazing spacer bending machine :
| Max. bending size | 2000mm*2000mm |
| Min. bending size | 250mm*200mm |
| Aluminum spacer width | 5.5-27mm |
| Dimensional error | ±0.5mm |
| Angle error | ±1º |
| Processing speed | 17s |
| Air supply | ≥0.65MPa |
| Total power | AC220/380V 50Hz 2.5KW |
| Dimension | 10500mm*2200mm*2600mm |
Insulated aluminum spacers are one of the materials needed to make double glazing. Its quality is directly related to the effectiveness of double glazing, its useful life, and its insulation function. The main function of double glazing is to evenly separate or effectively support both sides or multiple parts of the glass.
Use an automatic spacer bar bender to place the spacer frame inside the aluminum spacer bar. Spacers can be aluminum spacer bars, stainless steel bars, warm edge spacer bars (plastic spacer bars).
Related Product
Vertical Insulating Glass Sealing Robot LJTJ2540
Main Features:
• Adopt Japan servo control system with stable performance
• Min & Max glass sizes can be optional
• Adopt 8 servo motors
• Automatically measure glass size, glue depth and glue speed with linear adjustment
• Adopt timing belt to keep smooth convey with accurate position
• Spares are produced with high standardization and high precision, ensure the machine can be used with long-term working
• Full automatic and high-efficiency machine
• Automatically repair glass corners with beautiful surface
• Smooth convey without scratch and pollution
• The glass corners are full without air bubbles, smooth surface, no need to
• Single-function parts are equipped with manual functions, easy adjustment
• Can coating more than 8 kinds of shaped glass, include Semicircle. Trapezoidal. Parallelogram. Circular. Polygon, etc (Optional)
• Seal stepped glass fully at once (Optional)
• Can seal stepped IG with four sides (Optional)
• Adopts double pumps device to use two kinds of different sealants, such as silicone, polysulfide and silicone structural sealant (optional)
Technical data
| Max. glass size | 2500*4000mm (Optional) |
| Min. glass size | 300*300mm |
| Glass thickness | 12-50mm |
| Working speed | 5-40m/min |
| Air pressure | ≥0.6MPa |
| Squeeze pressure | 32MPa |
| Voltage power | 380V 12kw |
| Overall dimension | 11000*2000*3500mm |
Contact Now
