Vertical Glass Washing Machine With Soft Brushes

2000 mm 2500 mm Height Glass Washing Machine with Soft Brushes Stainless steel



Main Features:

Washing speed : sumer 8-10m, winter 6-7m

Washing max glass size : 2500mm-3500mm

Washing min glass size: 400mm-280mm

Glass thickness: 3-15mm

Washing brushes : 6 pieces

Brushes Material : soft brushes with 0.1mm diameter

Air knife : new design and adjusable

The air knife can be adjusted according to the different thickess of glasses, which keep a fast speed.

Transfer wheels : All wheels with power

Water heat and air heat : yes

Air motor : can be closed automatically, save energy

Washing low-e glass : yes



Parameters:


Max glass size 2500-3500
Min glass size 400-280
Glass thickness 3 - 18mm
Power 18.5kw
Washing speed 8-10m
Voltage 380V 50Hz 3P (Optional)

1. There is the Low-e glass sensor in the washing machine
This sensoris installed before washing machine. It could automatically recognize Low-e glass surface fast and precisely, preventing the glass from dropping Low-e surface.

2. The washing machine uses six soft (Low-e) brushes with the 01mm diameter only. It has 6 brushes which are all soft brush, can wash low-e glass, flat glass, tempered glass and so on. It has a diameter of less than 0.1mm bristles, never damage glass, especially for low-e glass.


3. Using Europe's advanced anti-noise system to create a good working environment for employees. The noise can be controlled below 90 decibels by using nylon gear and sponges.


4. Water heating system and water filter system.

As different countries have differentwater quality, in order to ensure that the glass is washes clearly enough,adoptingair heating system, to use soft water to wash glass. What’s more, using water filter system to make water recycling, save water and keep the water clear.

5. The special structure inside the washing machine can automatically recognize glass thickness. Allowing different thicknesses of glass to be transferred quickly, increasing production speed. According to the test, it takes only 22s to produce a 1m*m insulating glass.

1). There is a universal joint device, when the glass thickness was changed, the wind knife will move forward and backward to adjust the distance so that the relative distance between the wind knife and the glass is constant, so as to avoid damage to the glass due to the changes of the glass thickness.
2). There are chain gears on both sides of the bottom of the glass to actively transfer the glass which can keep a fast speed, not only the large size, small size glass can also be passed quickly.

Other Insulating Glass Equipment of our company:
1.Insulating Glass Production Line
2.Spacer  Bending Machine
3.Desiccant Filling Machine
4.Butyl Extruder Machine
5.Insulating Glass Sealing Robot
6.Glass Washing Machine