Automatic Vertical Double Glazing Sealing Machine

Automatic Vertical Insulating Glass Sealants Sealing Robot Machine

Main Features of Insulating Glass Sealing Robot Machine:

• Japan Yaskawa servo system control, fully automatic and efficient sealing machine

• 4 sections, can store glass

• Using a synchronous belt, stable transmission, and accurate positioning

• Use scraper and roller to automatically repair glass corners

• Automatic measurement of glass size and glue depth (30mm)

• Each automatic function comes with manual operation

• Can be coated with double glass

• Special-shaped glass stepped glass, triple-layer glass with optional edges (optional)

• One set of booster pumps controls two sets of sealant (optional)

• Silicone, polysulfide, and silicone structural sealants can be used

• The glue head is located at the front of the machine for easy coating of step glass

• Can be connected with insulating glass processing line

• With scan code function (optional)

Specification of Insulating Glass Sealing Robot 

2.2 Machine Noise

Function and feature of Insulating Glass Sealing  Machine

1. This machine is suitable for glass deep-processing enterprises, with a high degree of automation, reducing labor intensity, saving manpower, and improving production efficiency
2. The whole machine adopts a man-machine touch screen interface with memory function.
3. After sealing, the four corners of the glass are full without bubbles, and the surface is smooth without beveled edges
4. Two sets of independent sealant supply systems (including stirring device) are adopted, and the two kinds of sealants can be quickly switched, and one-key operation is convenient (Type II)

5. The machine has a width of 1.5m, a small footprint, and space-saving
6. The third level can store glass in advance, effectively improving efficiency

7. The smallest hollow glass that can be processed is 400*300mm

8. Anti-blocking device is installed in the mixer

9. The servo control system adopts a world-renowned brand (Yaskawa, Japan) with stable performance
10. Shaft transmission makes the glass conveying stable and accurate positioning.
11. The special V-shaped transmission belt prevents the sealant from sticking to the conveyor belt and ensures that the edge of the glass is clean. The V-shaped block can be replaced.
12. The spare parts are produced in standardized and high-precision to ensure the long-term stable use of the machine
13. Suitable for three-layer glass.

14. The back plate conveying wheel adopts the embedded wheel to ensure smooth glass conveying

Technical data

Electrical parameters

Related product of LIJIANG GLASS

Vertical Double Glazing Glass Production Line With Filling Argon Gas Optional Function

Details introduce of the LJBZ2535G

The argon gas filling insulating glass processing line has 7 sections totally:

01 transfer section;

02 washing machine;

03 discharge section;

04 inspection and installation section;

05 transfer section;

06 pressing and filling section;

07 discharge section.

• 01 transfer section

Coating detection mechanism, automatic detection of offline Low-e film

• 02 washing machine

Main feature:

• Use 6 0.1mm soft bristles and soft bristles to clean Low-E glass

• Pre-wash (optional)

• The new air knife adopts aluminum profile (duckbill air knife), and the size of the air outlet is adjusted by the aluminum profile duckbill. This can reduce the number of adjustment screws, ensure that each screw is not loose, and avoid air knife resonance.

• The air knife can automatically adjust the width of the air knife according to the thickness

• The operation box with washing speed display can accurately display the washing speed (8-10m)

• Water tank automatic temperature control and water replenishment system

• European noise reduction system

• stainless steel material

• 03 discharge section

• Storage glass

• 04 inspection and installation section

The new structure of this section is changed to an inline beam lifting structure (double beam). It is easy to inspect and wipe the glass

• 05 transfer section

• Automatic measurement of glass thickness. It can be used according to actual needs when working.

• 06 pressing and filling section

The special advantage of the glass pressing board: 

Main feature: 

• Extra-long (2500mm*3500mm) insulating glass can be compressed twice

• The glass is conveyed by a conveyor belt, and the glass is pressed by a servo motor

• The pressure plate can be opened for easy maintenance

• Adjustable pressure plate structure to ensure long service life

• Automatically filled with argon, the sealing effect is obvious, and the argon content is higher

• Set up areas to fill different sizes of glass, and adopt subsequent sealing methods to reduce argon loss

• The gas value can be set and the gas filling process can be displayed on the touch screen

• Fast reacting sensor for permanent control of gas filling process

• Gas concentration can reach more than 90%

• No need to drill holes on the spacer frame

• Standard gas is Argon gas

• 07 discharge section

• Storage glass

• Can be connected to sealing machine

Technical data

Electrical parameters

 Other Insulating Glass Equipment of our company:
1.Insulating Glass Production Line
2.Spacer  Bending Machine
3.Desiccant Filling Machine
4.Butyl Extruder Machine
5.Insulating Glass Sealing Robot
6.Glass Washing Machine