Automatic Horizontal Glass Washing Machine for sale

Automatic Horizontal Glass Washing and Drying Machine LJWBQJ2500 used for cleaning and drying the upper and lower surfaces of ordinary plate glass and high quality low-e glass,it is composed of incoming segment, cleaning air-drying segment and out goingsegment.

Main features:
1. Aluminum alloy assembly structure, no waste concept, permanent use,High efficiency, energy saving 70%;
2. The remaining sheet metal parts are all advanced mechanical spraying Paint or powder
3. The rubber roller is made of vulcanized rubber with a stainless steel shaft;
4. The washing part in contact with water is made of stainless steel;
5. In the cleaning department, the air duct personnel are lifted as a whole, the maximum lift: 350mm, easy to clean and maintain;
6. Three pairs of brushes (Ø150mm), stainless steel shaft structure (low-e glass, ordinary coated glass and daylight coated glass can be cleaned without damaging the coated surface);
7. Two pairs of special stainless steel and aluminum alloy air knives are configured, with high wind power and good air drying effect, with heating system (with temperature control device, optional opening and closing);
8. An air filter is installed in the air inlet of the fan. The air volume is large and the air drying effect is good. The entire air box is installed in the upper part of the workshop, and the side is equipped with an air filter for easy inspection and cleaning.
9. Gear drive, frequency conversion speed regulation, digital display main drive, and the rotation of the brush roller in the washing section are driven by independent belts of the upper and lower motors respectively. The frequency conversion speed regulation is stable, and the service life is long, realizing the cleaning of special glass with high requirements;
10. Mechanical button control, digital display of washing machine, simple operation, easy operation and easy maintenance;
11. Outside the water tank of the washing machine, it is convenient to clean, change and inspect the water tank, so that the washing effect of the washing machine is cleaner.
12. Optional PLC control, touch screen display, convenient for workers to operate and maintain, and can be connected to all edging machine manufacturers without gaps (purchase separately if necessary)

Technical parameters:

1. Maximum glass width: 2500mm (effective maximum: 2650mm)

2. Minimum glass specification: 400mm×400mm (limited to single row on left and  right sides)

3. Glass thickness: 3mm-25mm (digital display)

4. Speed range: glass thickness within 3-25mm Vmax=1-12m/min

5. Main drive, brush speed regulation method: frequency control

6. Table height :900±25mm

Origin of motor and main accessories：

other product：

1.Insulating Glass Production Line

2.Aluminum Spacer Bending Equipment

3.Molecular Sieve Filling Machine

4.Automatic Butyl Extruder

5.Glass Edging Machine